The PUCEST^® SZ- and SZF Panel

The PUCEST SZ plate with toothed profile is recommended for grain sizes from 15 mm. The profile bars of the SZ plate allow the usually acute impact angle of the conveyed material to be largely changed to a right angle, whereby the abrasive (scraping) wear effect is considerably reduced. As a result, the SZ plates achieve outstanding service lives. The PUCEST SZF plate has finer teeth and is therefore suitable for materials from 3 mm grain size.

PUCEST SZF-Panel (the maximum size of the panels is 3000 x 1500 mm)

PUCEST SZ-Panel (the maximum size of the panels is 3000 x 1500 mm)

Some of the material that hits the plate collects in the teeth and acts as a buffer. This significantly slows down the wear effect. Another advantage of the baffle plate is its elasticity.Coarse-grained material (e.g. gravel) does not shatter on impact and the standard size of the plates is 3000 x 1500 mm with a thickness of 20 mm and 35 mm. The Shore hardness can be selected as required between 50° and 95° Shore.

The SZ panels are also available with aramid or perforated metal inserts. They can be suspended, glued or screwed in place. The PUCEST SZ panels can be easily cut to the desired fromat.

The advantages of the SZ plate:

• short downtimes for replacing damaged lining parts
• extremely wear-resistant lining
• material adhesions are prevented or eliminated

Application examples